|
|
|
|
|

Purolator's SERVA-PAK is an extended surface high capacity air
filter composed of individual dust holding pockets assembled in a metal support
frame. The SERVA-PAK header is manufactured from corrosion-resistant,
galvanized metal. The frame features rigid internal support for the filter,
and interlocking mitered corners. Read
More... [484 K]
|
|

DEFIANT 70/85/95% media bag filters are specifically manufactured
for system applications requiring high efficiency, non-shedding media filtration.
These include hospitals, health care facilities, food processing plants, pharmaceutical
manufacturing, telecommunications, and other HVAC applications.
Read More... [620 K]
|
|

The AERO-CELL is a rigid air filter engineered to provide medium
and high-efficiency filtration combined with a prolonged life cycle. Its box filter
construction eliminates the need for retainers and special external wire media
supports. Each AERO-CELL filter is constructed to meet Underwriters
Laboratories, Inc. requirements for Class 2 air filters. Read
More... [515 K]
|
|

The DEFIANT Cell 70/85/95% media meets today's ASHRAE
challenges in process control and contaminant reduction. The unique, patented
non-woven process used to manufacture DEFIANT Cell filters creates
a media which outperforms similar products with respect to initial efficiency,
average efficiency, and dust holding capacity. Read More...
[648 K]
|
|

The SERVA-CELL is a high efficiency, extended surface, ASHRAE
rated air filter for conditions such as high humidity, turbulent airflow, intermittent
water exposure, and elevated operating temperatures. Read
More... [291 K]
|
|
|

The ULTRA-CELLŪ is a high efficiency aluminum separator, fluid
seal style filter manufactured for environments requiring 95% minimum efficiency
on .3 micron particles, 99.97% efficiency on .3 micron, or 99.99% efficiency on
.3 micron (scan tested to assure no leak shall exceed 0.01% of the upstream challenge).
Read More... [381 K]
|
|
This high-capacity ULTRA-CELL® model is a high-efficiency
aluminum separator, fluid seal-style filter designed for applications
where increased air velocity is present and lower pressure drops
are required. Manufactured for environments requiring 99.97%
efficiency on .3 micron, or 99.99% efficiency on .3 micron
(scan tested to assure no leak shall exceed 0.01% of the upstream
challenge). Read More...
[153 K]
|
|
Purolator's high temperature ULTRA-CELLŪ filter
is a high efficiency aluminum separator style filter designed for
applications encountering temperatures up to 500°F. Manufactured
for environments requiring 95% minimum efficiency on .3 micron particles,
99.97% efficiency on .3 micron, or 99.99% efficiency on .3 micron
(scan tested to assure no leak shall exceed 0.01% of the upstream
challenge). Its high surface area design provides the maximum amount
of effective filter media area. Standard frame materials for the
ULTRA-CELL are 16- gauge stainless steel. Read
More... [287 K]
|
|
Purolator's ULTRA-CELLŪ V-Pleat is a high efficiency
minipleat separator, gasket seal style filter, designed to operate
at 500 FPM with an average initial resistance of 1.00 W.G. Manufactured
for environments requiring 99.97% or 99.99% efficiency on .3 micron
particles. (Due to the design of the V-pleat, it cannot be scan
tested.) Its high surface area design provides the maximum amount
of effective filter media area. Standard frame material is anodized,
extruded aluminum. Read More... [87
K]
|
|
The
15B Class 100 Filter System meets or exceeds
requirements of Sit Force T.O. 00-25-203 and Federal Standard
209 which require particle counts not to exceed 100 particles
0.5 microns or larger per cubic foot of air. The 15B Class
100 Filter System easily installs within minutes, without
the need of special tools. See Clean
Air Hoods also.
|
|
|
A valuable combination of features are what make CRI Terminal
Diffusers the best value on the market. All models are
available in 2' x 2' or 2' x 4' sizes with either 10" or
12" duct collars. 99.99% efficient HEPA filters are standard.
ULPA 99.9995% efficient filters are optional. The CAFM unit offers
many of the same features as our CFM module. It also includes
a replaceable filter element and a damper that's adjustable from
roomside for fast and easy maintenance with minimal clean room
downtime. The rectangular hood design provides a "flow-thru"
light housing just below the filter with a choice of two or four-lamp
filter module.
|
|
|
|
No one else in the industry offers a more complete line of fan
filter modules incorporating HEPA filters. Our SAM Fan/Filter
Modules are completely self-contained with a profile
as low as 12". With our exclusive MicroSound technology, sound
levels are kept at a minimum. Numerous models are available with
the industry-standard 99.99% efficient HEPA filter (0.3 micron
or larger).
Options include: 2' x 2', 2' x 4', 2' x 6', 4' x 4', Custom modules available,
Magnehelic gauge, Static control, Power cord, 208-277 volts, and
99.9995% efficient (0.12 micron or larger) ULPA filter.
|
|