Filtration Technology, Inc.- Filtration and Contamination Control Specialists
Home  |  Press & Articles  |  Case Studies  |  FAQs  |  Company Overview  |  Contact Us

1-800-338-4280

Filtration
Cleanrooms
Solutions By Industry

 

Cleanroom Components and Furnishings

Cleanroom Components
Laminar Flow Equipment

Specialty Production Equipment
View the following specialty production equipment:
Laminar Flow Modules
Horizontal Flow Module
  • The Laminar Flow Module shall be a CRI type.
  • The filter housing and plenum shall be fabricated from 16 gauge steel, reinforced and braced for rigidity. Housing shall be furnished with suspension support fittings to receive 3/8" threaded rod hangers supplied by others.
  • All interior surfaces of cabinet shall be acoustically lined with a non-shedding fiberglass insulation and secured with adhesive.
  • Blowers shall be belt driven, forward curved centrifugal type, dynamically balanced and tested prior to being installed with cabinet.
  • Open drip proof 60hz motor mounted on an adjustable slide base and provided with rubber isolators. Standard voltage is 208/230V with optional 460/480V.
Vertical Flow Module
  • The Laminar Flow Module shall be a CRI type.
  • The filter housing and plenum shall be fabricated from 16 gauge steel, reinforced and braced for rigidity. Housing shall be furnished with suspension support fittings to receive 3/8" threaded rod hangers supplied by others.
  • All interior surfaces of cabinet shall be acoustically lined with a non-shedding fiberglass insulation and secured with adhesive.
  • Blowers shall be belt driven, forward curved centrifugal type, dynamically balanced and tested prior to being installed with cabinet.
  • Open drip proof 60hz motor mounted on an adjustable slide base and provided with rubber isolators. Standard voltage is 208/230V with optional 460/480V.
Pass Thru Cabinets
  • The CRI Laminated Pass Thru Cabinet is adaptable to new construction or existing facilities and helps to control contaminants entering the clean room during pick-up and delivery of products or supplies.
  • Yield and productivity is increased because personnel remain clean and on the job; delivery personnel and contaminants remain outside the clean room.
  • CONSTRUCTION: 1-1/8" high density particle board with white laminate on all inside and outside surfaces.
  • OPTIONS: Mechanical interlock system, stainless steel surfaces and mounting trim.

Since 1971 Filtration Technology Inc. continues to demonstrate proven leadership as FILTRATION AND CONTAMINATION CONTROL SPECIALISTS by providing the highest quality in Cleanroom Facilities, Air & Liquid Filtration to all types of commercial, industrial and specialized manufacturing facilities.

Home  |  Contact Us  |  Privacy Statement  |  Press & Articles  |  Case Studies  |  FAQs
Filtration Technology, Inc.
P.O. Box 18168 -- Greensboro, NC 27419
Tel (336) 294-5655 -- Fax (336) 854-0454  •  E-Mail: sales@filtrationtechnology.com
Customer Service Telephone: 800-338-4280

Web Design by BĒM Interactive
Ceiling Grid Cleanguard Panel